Architectural Products: Exterior Ceilings

Steel Ceilings Exterior Ceiling Systems include those that are outside the
building but under a soffit or overhang, so that they are not directly exposed to
the weather. Exterior ceiling systems are based on Security Snap-In, Torsion
Spring, Patternz, Plank or Custom.

Modules vary; typically 24" x 24", 24" x 48" and 48" x 48", with a maximum up to 12" x 120"

The type of metal recommended depends primarily on the geographic location of the project. In dry climates galvanized steel is adequate, whereas in more corrosive areas, aluminum or stainless steel (normally #304) is required. In highly corrosive areas, stainless steel #316 may be more appropriate. The thickness of the material is normally dictated by the panel size.

(Details below are in PDF format and will open in a new browser window with Adobe Acrobat Reader.)

Technical Details and Specifications